ITQ-0020 220V 24V I-TORK Electric Actuator

ITQ-0020 220V 24V I-TORK Electric Actuator

I-TORK ITQ-0020 is an industrial Electric Actuator for automation and equipment control applications. It is also commonly referenced with compatible model code 220V.

Key Features

• I-TORK ITQ-0020 is prepared for pneumatic motion replacement, actuator repair and machine maintenance.

• Supports comparison of bore, stroke, mounting style, port layout and sensor option before installation.

• Useful where smooth movement, correct alignment and stable compressed-air supply are required.

Technical Data

Replacement Selection

When selecting a replacement for ITQ-0020 220V 24V I-TORK Electric Actuator, the complete model code, brand series, connection style and installation method should be checked first. Similar appearance alone is not enough for industrial maintenance, because small differences in interface, voltage, media compatibility or mounting layout may affect operation. Comparing the old part nameplate, machine position and existing fittings helps reduce mismatch risk before the product is ordered or installed.

Spare Parts Planning

For machines that run frequently, common models and key automation parts should be recorded in a spare parts list. Keeping suitable replacement parts in stock can shorten downtime when a fault occurs and reduce the time spent confirming model numbers during urgent maintenance. Stock records should include brand, model, specification and equipment position so the correct item can be found quickly.

Our Service Advantages

We support global industrial automation spare parts supply and can arrange international shipment by FedEx, UPS, DHL or other suitable express services according to order requirements. For model confirmation, replacement suggestions, photo comparison and basic technical questions, we try to reply within 24 hours. If the customer is not sure whether the part is suitable, old nameplate photos or equipment pictures can be provided for preliminary checking.

Application Notes

ITQ-0020 220V 24V I-TORK Electric Actuator is intended for industrial equipment maintenance, automation repair and spare part replacement where the exact I-TORK model reference is important. For cylinder or actuator replacement, confirm bore size, stroke, mounting style, port position, cushioning and sensor requirements. The actuator should be aligned with the machine load so side force, impact and air supply problems do not reduce service life. Before ordering or installing model ITQ-0020, compare the full nameplate information with the existing component, including 220V, 24V, port or mounting details, electrical data, pressure range and operating environment. During installation, isolate the machine safely, remove pressure or power according to site procedure, and check that seals, fittings, cables and fasteners are clean and correctly seated. After replacement, test the equipment at low speed or low pressure first, then confirm normal operation, leakage condition, response timing and repeatability before returning the machine to continuous production. If cross reference numbers are involved, compare 220V with the installed part before ordering.

Related Products

• AT-40 AT40 AD40 GT40 AT040 Small Pneumatic Actuator Butterfly Cylinder

• IFM E7905S AS-Interface Safety Door Switch Actuator

• AP02DA SIRCA Corrosion Resistant Pneumatic PPR Flanged Double Union Ball Valve

• Airtac 4M310-08 G1/4" 4M310-10 G3/8" 4M (NAMUR) Series Pneumatic Solenoid Valve

• Pneumatic Tubes & Hoses