V680-HS51 2m Omron Sensor

V680-HS51 2m Omron Sensor

OMRON V680-HS51 is an industrial Sensor for automation and equipment control applications. It is also commonly referenced with compatible model code V680, HS51.

Key Features

• OMRON V680-HS51 is prepared for position sensing, machine feedback and industrial automation replacement.

• Supports selection work where sensing distance, wiring style, output signal and mounting position must be compared.

• Useful for maintenance teams checking reliable detection before returning equipment to normal operation.

Technical Data

Installation Reminder

Before installation, the machine should be placed in a safe condition according to site procedure, including disconnecting power, air supply or pressure source when required. During fitting, pay attention to interface direction, fixed position, seal placement and connection tightness. After installation, start with low-speed, low-pressure or no-load testing before returning the equipment to normal operation.

After-Replacement Testing

After replacement, it is better not to return the machine directly to continuous production. Start testing in manual, low-speed or low-pressure mode and observe whether the action, response, signal, leakage condition and fastening position are normal. When operation becomes stable, the equipment can gradually return to normal working conditions, followed by a short recheck after initial running.

Our Service Advantages

We support global industrial automation spare parts supply and can arrange international shipment by FedEx, UPS, DHL or other suitable express services according to order requirements. For model confirmation, replacement suggestions, photo comparison and basic technical questions, we try to reply within 24 hours. If the customer is not sure whether the part is suitable, old nameplate photos or equipment pictures can be provided for preliminary checking.

Application Notes

V680-HS51 2m Omron Sensor is intended for industrial equipment maintenance, automation repair and spare part replacement where the exact OMRON model reference is important. For switch or sensor replacement, confirm the sensing method, target distance, wiring type, connector style and output signal before installation. The part should be positioned so that machine movement triggers it reliably without impact damage or false detection. For this specific listing, use the model code, brand marking and product photos together to confirm the replacement match. Before ordering or installing model V680-HS51, compare the full nameplate information with the existing component, including the listed specification, port or mounting details, electrical data, pressure range and operating environment. During installation, isolate the machine safely, remove pressure or power according to site procedure, and check that seals, fittings, cables and fasteners are clean and correctly seated. After replacement, test the equipment at low speed or low pressure first, then confirm normal operation, leakage condition, response timing and repeatability before returning the machine to continuous production. If cross reference numbers are involved, compare V680, HS51 with the installed part before ordering.

Specification Overview

Related Products

• E3Z-G81 2M Omron Photoelectric Sensor Switch

• E3ZG-T61 Omron Photoelectric Sensor Switch

• HL-5030 Omron Travel Limit Switch

• E2E-C04S12-WC-C1 Omron Connect Proximity Type Sensor

• E2E-X7D1-N Omron Connect Proximity Type Sensor