SCR353G230 24DC ASCO G3 Pulse Valve

SCR353G230 24DC ASCO G3 Pulse Valve

ASCO SCR353G230 is an industrial Pulse Valve for automation and equipment control applications. It is also commonly referenced with compatible model code 24DC.

Key Features

• SCR353G230 24DC ASCO G3 Pulse Valve supports industrial valve replacement work where the original model reference needs to be preserved.

• Useful for pneumatic control circuits that require confirmed connection size, actuation type and electrical compatibility.

• Prepared with product images and technical data to help compare the installed valve before maintenance or ordering.

Technical Data

Installation Reminder

Before installation, the machine should be placed in a safe condition according to site procedure, including disconnecting power, air supply or pressure source when required. During fitting, pay attention to interface direction, fixed position, seal placement and connection tightness. After installation, start with low-speed, low-pressure or no-load testing before returning the equipment to normal operation.

After-Replacement Testing

After replacement, it is better not to return the machine directly to continuous production. Start testing in manual, low-speed or low-pressure mode and observe whether the action, response, signal, leakage condition and fastening position are normal. When operation becomes stable, the equipment can gradually return to normal working conditions, followed by a short recheck after initial running.

Our Service Advantages

We support global industrial automation spare parts supply and can arrange international shipment by FedEx, UPS, DHL or other suitable express services according to order requirements. For model confirmation, replacement suggestions, photo comparison and basic technical questions, we try to reply within 24 hours. If the customer is not sure whether the part is suitable, old nameplate photos or equipment pictures can be provided for preliminary checking.

Application Notes

SCR353G230 24DC ASCO G3 Pulse Valve is intended for industrial equipment maintenance, automation repair and spare part replacement where the exact ASCO model reference is important. For pneumatic or electromagnetic valve use, check the connection size, pressure range, electrical rating and actuation method against the original equipment. Make sure the media, ambient temperature and installation orientation are suitable before the valve is fitted into the automation line. For this specific listing, pay special attention to 24DC, Confirm by existing interface, Confirm by product photos and nameplate when comparing it with the installed part. Before ordering or installing model SCR353G230, compare the full nameplate information with the existing component, including 24DC, port or mounting details, electrical data, pressure range and operating environment. During installation, isolate the machine safely, remove pressure or power according to site procedure, and check that seals, fittings, cables and fasteners are clean and correctly seated. After replacement, test the equipment at low speed or low pressure first, then confirm normal operation, leakage condition, response timing and repeatability before returning the machine to continuous production. If cross reference numbers are involved, compare 24DC with the installed part before ordering.

Specification Overview

Related Products

• SCG353G047 220/50 ASCO G1 1/2 Pulse Jet Valve

• SCG353G047 238713-006 ASCO Pulse Jet Valve SCG353G047 24DC Solenoid Coil

• SCG356B434V 24DC ASCO G1/4 Pulse Jet Valve

• SCG356B434VMS 24DC ASCO G1/4 Stainless Steel Pulse Jet Valve

• SCG356B436V 24DC ASCO G1/4 Pulse Jet Valve