SCE238D002 24DC ASCO G1/2 0.3-10bar Solenoid Valve

SCE238D002 24DC ASCO G1/2 0.3-10bar Solenoid Valve

ASCO SCE238D002 is an industrial Solenoid Valve for automation and equipment control applications. It is also commonly referenced with compatible model code 24DC, 10BAR.

Key Features

• ASCO SCE238D002 is prepared as a practical Solenoid Valve replacement for pneumatic automation service.

• Designed for model-code matching, port verification and machine maintenance where reliable air control is required.

• Suitable for repair stock where coil data, pressure range and installation interface must be checked before fitting.

Technical Data

After-Replacement Testing

After replacement, it is better not to return the machine directly to continuous production. Start testing in manual, low-speed or low-pressure mode and observe whether the action, response, signal, leakage condition and fastening position are normal. When operation becomes stable, the equipment can gradually return to normal working conditions, followed by a short recheck after initial running.

Replacement Selection

When selecting a replacement for SCE238D002 24DC ASCO G1/2 0.3-10bar Solenoid Valve, the complete model code, brand series, connection style and installation method should be checked first. Similar appearance alone is not enough for industrial maintenance, because small differences in interface, voltage, media compatibility or mounting layout may affect operation. Comparing the old part nameplate, machine position and existing fittings helps reduce mismatch risk before the product is ordered or installed.

Payment Options

We support several common payment methods for different purchasing situations. International orders can be paid in USD by T/T, PayPal or other agreed methods depending on order amount and shipment arrangement. For RMB payments in mainland China, Alipay QR and WeChat Pay QR can also be arranged. The final payment method can be confirmed before order processing so the purchasing record and delivery plan remain clear.

Application Notes

SCE238D002 24DC ASCO G1/2 0.3-10bar Solenoid Valve is intended for industrial equipment maintenance, automation repair and spare part replacement where the exact ASCO model reference is important. For valve replacement, confirm the flow direction, port thread, coil voltage, sealing material and normal operating position before installation. The valve should be matched with the machine circuit, compressed air quality and duty cycle so that switching response and service life remain stable. For this specific listing, pay special attention to 24DC, G1/2, Confirm by product photos and nameplate when comparing it with the installed part. Before ordering or installing model SCE238D002, compare the full nameplate information with the existing component, including 24DC, port or mounting details, electrical data, pressure range and operating environment. During installation, isolate the machine safely, remove pressure or power according to site procedure, and check that seals, fittings, cables and fasteners are clean and correctly seated. After replacement, test the equipment at low speed or low pressure first, then confirm normal operation, leakage condition, response timing and repeatability before returning the machine to continuous production. If cross reference numbers are involved, compare 24DC, 10BAR with the installed part before ordering.

Specification Overview

Related Products

• NF8327B102MS 24DC ASCO 1/4NPT Explosion-Proof Solenoid Valve

• NF8327B112 24DC ASCO 1/4NPT Ex-Proof Solenoid Valve

• NF8327B312 24DC ASCO 1/4NPT Explosion-Proof Solenoid Valve

• NF8551A309MO 24DC Asco 1/4NPT Ex-Proof Solenoid Valve

• NF8551A321 24DC ASCO 1/4NPT Explosion-Proof Solenoid Valve