MY1H16G-50-100-150-200-250-300-350-400LHAZ SMC Mechanical Pneumatic Cylinder

MY1H16G-50-100-150-200-250-300-350-400LHAZ SMC Mechanical Pneumatic Cylinder

MY1H16G-50 MY1H16G is an industrial Pneumatic Cylinder for automation and equipment control applications. It is also commonly referenced with compatible model code MY1H16G-50-100, 150-200-250, 300-350-400LHAZ, 400LHAZ.

Key Features

• MY1H16G-50 Pneumatic Cylinder model MY1H16G supports industrial pneumatic drive and repair applications.

• Designed for selection work where load direction, mounting accuracy and air flow requirements need verification.

• Useful for keeping machine movement consistent after replacement or scheduled maintenance.

Technical Data

Installation Reminder

Before installation, the machine should be placed in a safe condition according to site procedure, including disconnecting power, air supply or pressure source when required. During fitting, pay attention to interface direction, fixed position, seal placement and connection tightness. After installation, start with low-speed, low-pressure or no-load testing before returning the equipment to normal operation.

After-Replacement Testing

After replacement, it is better not to return the machine directly to continuous production. Start testing in manual, low-speed or low-pressure mode and observe whether the action, response, signal, leakage condition and fastening position are normal. When operation becomes stable, the equipment can gradually return to normal working conditions, followed by a short recheck after initial running.

Our Service Advantages

We support global industrial automation spare parts supply and can arrange international shipment by FedEx, UPS, DHL or other suitable express services according to order requirements. For model confirmation, replacement suggestions, photo comparison and basic technical questions, we try to reply within 24 hours. If the customer is not sure whether the part is suitable, old nameplate photos or equipment pictures can be provided for preliminary checking.

Application Notes

MY1H16G-50-100-150-200-250-300-350-400LHAZ SMC Mechanical Pneumatic Cylinder is intended for industrial equipment maintenance, automation repair and spare part replacement where the exact MY1H16G-50 model reference is important. For pneumatic drive maintenance, verify the cylinder dimensions, seal condition, magnetic sensing option and load direction before fitting. Correct alignment, clean air and suitable speed control help keep the machine movement smooth and repeatable. For this specific listing, use the model code, brand marking and product photos together to confirm the replacement match. Before ordering or installing model MY1H16G, compare the full nameplate information with the existing component, including the listed specification, port or mounting details, electrical data, pressure range and operating environment. During installation, isolate the machine safely, remove pressure or power according to site procedure, and check that seals, fittings, cables and fasteners are clean and correctly seated. After replacement, test the equipment at low speed or low pressure first, then confirm normal operation, leakage condition, response timing and repeatability before returning the machine to continuous production. If cross reference numbers are involved, compare MY1H16G-50-100, 150-200-250, 300-350-400LHAZ with the installed part before ordering.

Specification Overview

Related Products

• AT-32 AT32 ACT-32 AD32 Pneumatic Actuator Ball Valve Butterfly Cylinder

• AT-40 AT40 AD40 GT40 AT040 Small Pneumatic Actuator Butterfly Cylinder

• AT-52 AT52 ACT-52 AD52 Pneumatic Actuator Gate Valve Butterfly Cylinder

• AT-63 AT63 ACT-63 AD63 Namur Butterfly Pneumatic Actuator Gate Valve Cylinder

• CDJ2B6-10-16-15-30-45-60-75-100-125ARZB SMC Stainless Steel Pneumatic Cylinder