MXS6-10-20AS 8-12-30-40AS 16-40BS-50 20-75-100ABS SMC Pneumatic Cylinder

MXS6-10-20AS 8-12-30-40AS 16-40BS-50 20-75-100ABS SMC Pneumatic Cylinder

MXS6-10 MXS6-10-20AS is an industrial Pneumatic Cylinder for automation and equipment control applications. It is also commonly referenced with compatible model code 12-30-40AS, 16-40BS-50, 20-75-100ABS, MXS6, 20AS, 40AS, 40BS, 100ABS.

Key Features

• MXS6-10 MXS6-10-20AS is prepared for pneumatic motion replacement, actuator repair and machine maintenance.

• Supports comparison of bore, stroke, mounting style, port layout and sensor option before installation.

• Useful where smooth movement, correct alignment and stable compressed-air supply are required.

Technical Data

Maintenance Check

Before replacing model MXS6-10-20AS, maintenance staff should inspect the original component marking, connection ports, mounting position, electrical interface, sealing area and nearby pipes or cables. For equipment that has been running for a long time, it is also useful to check for wear, aging, leakage, loose fittings or poor contact. These checks can reduce repeated adjustment after installation.

Industrial Application

This Pneumatic Cylinder can be considered for industrial automation equipment, pneumatic control systems, production line maintenance and machine repair projects. Different machines may require different response behavior, connection method, installation space and operating environment, so the product should be matched with the actual equipment condition. Correct product selection helps keep the system stable and makes future maintenance work easier to organize.

Our Service Advantages

We support global industrial automation spare parts supply and can arrange international shipment by FedEx, UPS, DHL or other suitable express services according to order requirements. For model confirmation, replacement suggestions, photo comparison and basic technical questions, we try to reply within 24 hours. If the customer is not sure whether the part is suitable, old nameplate photos or equipment pictures can be provided for preliminary checking.

Application Notes

MXS6-10-20AS 8-12-30-40AS 16-40BS-50 20-75-100ABS SMC Pneumatic Cylinder is intended for industrial equipment maintenance, automation repair and spare part replacement where the exact MXS6-10 model reference is important. For cylinder or actuator replacement, confirm bore size, stroke, mounting style, port position, cushioning and sensor requirements. The actuator should be aligned with the machine load so side force, impact and air supply problems do not reduce service life. For this specific listing, use the model code, brand marking and product photos together to confirm the replacement match. Before ordering or installing model MXS6-10-20AS, compare the full nameplate information with the existing component, including the listed specification, port or mounting details, electrical data, pressure range and operating environment. During installation, isolate the machine safely, remove pressure or power according to site procedure, and check that seals, fittings, cables and fasteners are clean and correctly seated. After replacement, test the equipment at low speed or low pressure first, then confirm normal operation, leakage condition, response timing and repeatability before returning the machine to continuous production. If cross reference numbers are involved, compare 12-30-40AS, 16-40BS-50, 20-75-100ABS with the installed part before ordering.

Specification Overview

Related Products

• MXS6-10-20 8-12-30-40 16-40-50 20-75-100ABSAT SMC Pneumatic Air Cylinder

• AT-32 AT32 ACT-32 AD32 Pneumatic Actuator Ball Valve Butterfly Cylinder

• AT-40 AT40 AD40 GT40 AT040 Small Pneumatic Actuator Butterfly Cylinder

• AT-52 AT52 ACT-52 AD52 Pneumatic Actuator Gate Valve Butterfly Cylinder

• AT-63 AT63 ACT-63 AD63 Namur Butterfly Pneumatic Actuator Gate Valve Cylinder