MDBB32-40-50-63-80-100-125-25-75-100-200-300Z SMC Pneumatic Cylinder

MDBB32-40-50-63-80-100-125-25-75-100-200-300Z SMC Pneumatic Cylinder

MDBB32-40 MDBB32-40-50 is an industrial Pneumatic Cylinder for automation and equipment control applications. It is also commonly referenced with compatible model code 63-80-100, 125-25-75, 100-200-300Z, MDBB32, 300Z.

Key Features

• MDBB32-40 MDBB32-40-50 is prepared for pneumatic motion replacement, actuator repair and machine maintenance.

• Supports comparison of bore, stroke, mounting style, port layout and sensor option before installation.

• Useful where smooth movement, correct alignment and stable compressed-air supply are required.

Technical Data

Product Inspection

After receiving the product, check the appearance, label, interface, mounting holes and included accessories before installation. For pneumatic or electrical components, the thread, sealing surface, wiring end and moving area should also be reviewed. A simple inspection before fitting can identify possible transport damage, model selection mistakes or missing accessories early.

Model Matching

Model matching should be based on the full code rather than only a few visible characters. Products in the same series may have similar appearance but different suffixes, port sizes, voltage options or mounting styles. Checking the old part label, equipment manual, purchase record and installation position together can improve matching accuracy and help avoid unnecessary return or rework.

Our Service Advantages

We support global industrial automation spare parts supply and can arrange international shipment by FedEx, UPS, DHL or other suitable express services according to order requirements. For model confirmation, replacement suggestions, photo comparison and basic technical questions, we try to reply within 24 hours. If the customer is not sure whether the part is suitable, old nameplate photos or equipment pictures can be provided for preliminary checking.

Application Notes

MDBB32-40-50-63-80-100-125-25-75-100-200-300Z SMC Pneumatic Cylinder is intended for industrial equipment maintenance, automation repair and spare part replacement where the exact MDBB32-40 model reference is important. For cylinder or actuator replacement, confirm bore size, stroke, mounting style, port position, cushioning and sensor requirements. The actuator should be aligned with the machine load so side force, impact and air supply problems do not reduce service life. For this specific listing, use the model code, brand marking and product photos together to confirm the replacement match. Before ordering or installing model MDBB32-40-50, compare the full nameplate information with the existing component, including the listed specification, port or mounting details, electrical data, pressure range and operating environment. During installation, isolate the machine safely, remove pressure or power according to site procedure, and check that seals, fittings, cables and fasteners are clean and correctly seated. After replacement, test the equipment at low speed or low pressure first, then confirm normal operation, leakage condition, response timing and repeatability before returning the machine to continuous production. If cross reference numbers are involved, compare 63-80-100, 125-25-75, 100-200-300Z with the installed part before ordering.

Specification Overview

Related Products

• AT-32 AT32 ACT-32 AD32 Pneumatic Actuator Ball Valve Butterfly Cylinder

• AT-40 AT40 AD40 GT40 AT040 Small Pneumatic Actuator Butterfly Cylinder

• AT-52 AT52 ACT-52 AD52 Pneumatic Actuator Gate Valve Butterfly Cylinder

• AT-63 AT63 ACT-63 AD63 Namur Butterfly Pneumatic Actuator Gate Valve Cylinder

• CDJ2B6-10-16-15-30-45-60-75-100-125ARZB SMC Stainless Steel Pneumatic Cylinder