KMYZ-2-24-2.5-LZD 34997 Festo Part Air Part Head

KMYZ-2-24-2,5-LZD 34997 Festo Part Air Part Head

FESTO KMYZ-2-24-2,5-LZD is an industrial Part Air Part Head for automation and equipment control applications. It is also commonly referenced with compatible model code 34997.

Key Features

• KMYZ-2-24-2,5-LZD 34997 Festo Part Air Part Head is suitable for machine maintenance where accurate part identification is important.

• Prepared with product images and technical data to help compare appearance, interface and specification details.

• Helps maintenance teams reduce selection errors during replacement and spare stock preparation.

Technical Data

Installation Reminder

Before installation, the machine should be placed in a safe condition according to site procedure, including disconnecting power, air supply or pressure source when required. During fitting, pay attention to interface direction, fixed position, seal placement and connection tightness. After installation, start with low-speed, low-pressure or no-load testing before returning the equipment to normal operation.

After-Replacement Testing

After replacement, it is better not to return the machine directly to continuous production. Start testing in manual, low-speed or low-pressure mode and observe whether the action, response, signal, leakage condition and fastening position are normal. When operation becomes stable, the equipment can gradually return to normal working conditions, followed by a short recheck after initial running.

Our Service Advantages

We support global industrial automation spare parts supply and can arrange international shipment by FedEx, UPS, DHL or other suitable express services according to order requirements. For model confirmation, replacement suggestions, photo comparison and basic technical questions, we try to reply within 24 hours. If the customer is not sure whether the part is suitable, old nameplate photos or equipment pictures can be provided for preliminary checking.

Application Notes

KMYZ-2-24-2,5-LZD 34997 Festo Part Air Part Head is intended for industrial equipment maintenance, automation repair and spare part replacement where the exact FESTO model reference is important. When this component is prepared as a spare part, verify the brand series, specification, connection method and installation space before ordering. Keep the old part for comparison until the new item has been tested on the machine. For this specific listing, pay special attention to 54 g when comparing it with the installed part. Before ordering or installing model KMYZ-2-24-2,5-LZD, compare the full nameplate information with the existing component, including the listed specification, port or mounting details, electrical data, pressure range and operating environment. During installation, isolate the machine safely, remove pressure or power according to site procedure, and check that seals, fittings, cables and fasteners are clean and correctly seated. After replacement, test the equipment at low speed or low pressure first, then confirm normal operation, leakage condition, response timing and repeatability before returning the machine to continuous production. If cross reference numbers are involved, compare 34997 with the installed part before ordering.

Specification Overview

Related Products

• GRLA-M5-B 151160 Festo Part Speed Connect Head

• KMEB-1-24-10-LED Festo 193457 Electric Line Part Head

• DSM-12-270-P1-A-B 566203 Festo Part Part Pneumatic Cylinder

• DSNU-10-15-P-A 1908251 Festo Part Part Mini Pneumatic Cylinder

• ESH-HCL-4-QS 189229 Festo Part Part