Brand: ASCO.
Model: E290A064.
Product type: Angle Seat Valve.
Category: Pneumatic Valves.
| Availability: | |
|---|---|
| Quantity: | |
E290A064
ASCO
ASCO E290A064 is an industrial Angle Seat Valve for automation and equipment control applications.
ASCO E290A064 is prepared as a practical Angle Seat Valve replacement for pneumatic automation service.
Designed for model-code matching, port verification and machine maintenance where reliable air control is required.
Suitable for repair stock where coil data, pressure range and installation interface must be checked before fitting.
Brand | ASCO |
|---|---|
Model | E290A064 |
Product Type | Angle Seat Valve |
Category | Angle Seat Valve |
After replacement, it is better not to return the machine directly to continuous production. Start testing in manual, low-speed or low-pressure mode and observe whether the action, response, signal, leakage condition and fastening position are normal. When operation becomes stable, the equipment can gradually return to normal working conditions, followed by a short recheck after initial running.
When selecting a replacement for E290A064 ASCO G1 1/2(DN 40) Angle Seat Valve, the complete model code, brand series, connection style and installation method should be checked first. Similar appearance alone is not enough for industrial maintenance, because small differences in interface, voltage, media compatibility or mounting layout may affect operation. Comparing the old part nameplate, machine position and existing fittings helps reduce mismatch risk before the product is ordered or installed.
We support several common payment methods for different purchasing situations. International orders can be paid in USD by T/T, PayPal or other agreed methods depending on order amount and shipment arrangement. For RMB payments in mainland China, Alipay QR and WeChat Pay QR can also be arranged. The final payment method can be confirmed before order processing so the purchasing record and delivery plan remain clear.
E290A064 ASCO G1 1/2(DN 40) Angle Seat Valve is intended for industrial equipment maintenance, automation repair and spare part replacement where the exact ASCO model reference is important. For valve replacement, confirm the flow direction, port thread, coil voltage, sealing material and normal operating position before installation. The valve should be matched with the machine circuit, compressed air quality and duty cycle so that switching response and service life remain stable. For this specific listing, pay special attention to 1/2, Confirm by existing interface, Confirm by product photos and nameplate when comparing it with the installed part. Before ordering or installing model E290A064, compare the full nameplate information with the existing component, including the listed specification, port or mounting details, electrical data, pressure range and operating environment. During installation, isolate the machine safely, remove pressure or power according to site procedure, and check that seals, fittings, cables and fasteners are clean and correctly seated. After replacement, test the equipment at low speed or low pressure first, then confirm normal operation, leakage condition, response timing and repeatability before returning the machine to continuous production.
Model | E290A064 |
|---|---|
Brand | ASCO |
Product Type | Angle Seat Valve |
Material | Confirm by product photos and nameplate |
Voltage / Coil | 1/2 |
Interface / Port | Confirm by existing interface |
Working Pressure | Confirm by official datasheet/nameplate |
Maximum Pressure | Confirm by official datasheet/nameplate |
Working Temperature | Confirm by official datasheet/nameplate |
Maximum Temperature | Confirm by official datasheet/nameplate |
Medium / Application | Compressed air or compatible industrial media |
Special Rating | Standard industrial version |