DFSP-20-15-DS-PA 576076 Festo Pneumatic Cylinder

DFSP-20-15-DS-PA 576076 Festo Pneumatic Cylinder

FESTO DFSP-20-15 is an industrial Pneumatic Cylinder for automation and equipment control applications. It is also commonly referenced with compatible model code DS-PA, 576076.

Key Features

• FESTO Pneumatic Cylinder model DFSP-20-15 supports industrial pneumatic drive and repair applications.

• Designed for selection work where load direction, mounting accuracy and air flow requirements need verification.

• Useful for keeping machine movement consistent after replacement or scheduled maintenance.

Technical Data

Maintenance Check

Before replacing model DFSP-20-15, maintenance staff should inspect the original component marking, connection ports, mounting position, electrical interface, sealing area and nearby pipes or cables. For equipment that has been running for a long time, it is also useful to check for wear, aging, leakage, loose fittings or poor contact. These checks can reduce repeated adjustment after installation.

Industrial Application

This Pneumatic Cylinder can be considered for industrial automation equipment, pneumatic control systems, production line maintenance and machine repair projects. Different machines may require different response behavior, connection method, installation space and operating environment, so the product should be matched with the actual equipment condition. Correct product selection helps keep the system stable and makes future maintenance work easier to organize.

Our Service Advantages

We support global industrial automation spare parts supply and can arrange international shipment by FedEx, UPS, DHL or other suitable express services according to order requirements. For model confirmation, replacement suggestions, photo comparison and basic technical questions, we try to reply within 24 hours. If the customer is not sure whether the part is suitable, old nameplate photos or equipment pictures can be provided for preliminary checking.

Application Notes

DFSP-20-15-DS-PA 576076 Festo Pneumatic Cylinder is intended for industrial equipment maintenance, automation repair and spare part replacement where the exact FESTO model reference is important. For pneumatic drive maintenance, verify the cylinder dimensions, seal condition, magnetic sensing option and load direction before fitting. Correct alignment, clean air and suitable speed control help keep the machine movement smooth and repeatable. For this specific listing, pay special attention to 6G when comparing it with the installed part. Before ordering or installing model DFSP-20-15, compare the full nameplate information with the existing component, including the listed specification, port or mounting details, electrical data, pressure range and operating environment. During installation, isolate the machine safely, remove pressure or power according to site procedure, and check that seals, fittings, cables and fasteners are clean and correctly seated. After replacement, test the equipment at low speed or low pressure first, then confirm normal operation, leakage condition, response timing and repeatability before returning the machine to continuous production. If cross reference numbers are involved, compare DS-PA, 576076 with the installed part before ordering.

Specification Overview

Related Products

• ADN-32-80-A-PPS-A 572663 Festo Pneumatic Cylinder

• ADN-40-50-A-P-A 536296 Festo Air Cylinder

• FESTO MSFG-24/42-50/60 24V DC 4527 Solenoid Coil for Tiger Classic Solenoid Valves MFH-5-1/8 MFH-5-1/4

• FESTO MSFG-24/42-50/60 4527 24V DC Tiger Classic Solenoid Valve MFH-5-1/8 MFH-5-1/4 Solenoid Coil

• FESTO MSFW-110-50/60 6720 110V AC Tiger Valve MFH-3-1/8 MFH-5-1/4-B Solenoid Coil